I have 2 cams (a 2 and a 2C) hard-wired to a common AC charger, which is plugged into an outside junction box. The power to the box can be turned on and off with a switch inside the house. As such, I can control the charging either of two ways:
- Leave the inside switch off most of the time, and only turn it on when I need to recharge either or both of the cams, then turn it back off, or
- Leave the switch on all the time, with both cams being continuously charged.
In the first case (intermittent charging), I would assume the correct setting for “Power Source” would be “Battery”.
My question is, in the second case (continuous charging), should the Power Source be set to “Battery” or “Solar”?